Wireless remote control AG002
Place of Origin
Guangdong, China (Mainland)
Metal and plastic
1,2,4 buttons optional
Led light color
Other Yellow, Red,Green,Purple etc. can be optional.
12V27A (Battery included )
1). Each one in a plastic bag or white box
samples in 3 days, bulk order in 7-15 days
It is designed with small size, beautiful exterior , Sound wave resonator (SAW) is used for stabilizing
frequency, With low consumption high efficiency, it will be your life become more and more comfortable .
Using High stability, SMT components, SAW (sound wave resonator),Optional for encoding IC.
1) .Erase the code (Delete the original code)
A.Press button “A” and “B” at the same time until LED flash 3 times
B.Release button “B” and Keep pressing button “A” , then press button “B” 3 times,LED flash fast
C.Release button “A” C,finish code clearance
2). Duplicating (Copy code from original transmitter)
A. Put duplicator aside of original transmitter,as close as possible.
B. Press and hold button “A” of original transmitter,then press and hold button “A” of duplicator until you see the duplicator’s LED flash and keep lighting
C. Release both buttons,finish code copy,copy other buttons in same way.
Press and hold button “C” and “D” for 3 seconds, the LED flash, all buttons return back to the latest copy
Please confirm two things (1. Frequency 2. Chip code(Encoder IC)before you buy it.
Works with the following remote control modules (please check your existing remote control before ordering): Your remotes also should be Fixed code or Learning code.
These chip codes supported attached below:
PT2260, PT2262, PT2264, PT2240, SC2260, SC2262, CS5211, HX2260, HX2262, HS2262, EV1527, HS1527, HS2260, FP527, HX1527, SMC918, AX5026, SMC926, etc.