The 12-volt 6-channel wireless intelligent receiving controller outputs the switching signals for the six relays, which can enable the devices to be controlled to reach the forward and reverse rotation of the motor, or the on/off switching of the switches and the requirements of various special control programs. Mainly used in electric doors, windows, lifting equipment, lift control and security
industries and other fields. The wireless receiving controller has the characteristics of high security, large storage capacity, stable performance and low power consumption, and is easy to use, does not need to adopt the traditional
jumper or dial switch code, only the wireless signal transmitted by the remote controller The receiving controller receives and stores, and can achieve supporting use. If the learned remote control is lost during use, simply clear the information stored in the receiver controller. Then the lost remote control will not be able to remotely control the receiver controller.
To regain usage rights, the owner must re-use the remote controller. Learn again before you can use it.
There are three types of self-locking, non-locking, interlocking, and non-locking.
1) Press the remote control No. 1 key to learn signal self-locking
2). Press the remote control No. 2 key to learn the signal interlock
3). Press 1-3 on the remote control to learn 1-3 way jog, 4-6 way self-locking
4). Press key 4 on the remote control to learn 1-3 jog, 4-6 interlock
5). Press key number 5 on the remote control to learn 1-2 track, 3-6 interlock
6). Press key 6 on the remote control to learn
Learning Remote Way
1. Press the learning button of the receiver - the light is on, indicating entering the learning state.
2. Press any button of the remote control - the light flashes to extinguishes, indicating that the
learning has been successful.
Clear Remote Way
Press the button for about 8 seconds as the receiver module learns to turn off the indicator light,
indicating that the stored information has been successfully cleared.