The Main Parameters:
Working Frequency: 315Mhz/433.92Mhz/other
Use range: Automatic gate/garage door/window etc.
Distance: 50-100 meter
Receiving sensitivity: -105 dBm
Quiescent current: 3-5 MA
Match code way: Learning code,fixed code
Board size: 70*50*18mm
Output signal: output with switch signal / output with voltage
Channel: 2 Channels
AG-C201 is a 12V voltage two channel wireless intelligence receiver controller,It can be controlled to achieve the motor forward and reverse, or switch on,off and other special control requirement. The product has stable performance, small size high receiver sensitivity.Mainly used for electric doors, windows, lifting equipment, gateways, lifts, industrial control and security Industry and other fields, and supporting the use of the remote control can be composed of complete set of wireless intelligent remote control system, wide range of uses,especially for cable doors, windows and burglar alarm control system to change the wireless system wired adapter. The wireless receiver controller,a high-security,stable performance, low power consumption of the features,and easy to use,without using the traditional jumper or DIP switch coding,just the radio signal emitted by the remote control allows the receiving controller receive and store,you can achieve supporting the use.The controller factory default is only a remote control and control, if a good learning remote control is lost during use,simply use the same type of remote control to relearn to cancel the original remote control and made use now right.Its output,respectively,three output way is self-locking,interlock, inching,It can leaning a lot of different remote control (such as2260,1527etc.)
The working way change can by jumper
A).Inching:Position1,2,3 vacancy, no need jumper connect
Inching function: Press remote A button the controller relay1 ON, release remote A button the controller relay 1OFF
Interlock function: Press remote A button the controller relay1 ON, press remote B button the controller relay 1OFF
C). Self-lock: Jumper connect 1, 2
Self-lock function: Press remote A button the controller relay1 ON, Press A button again the controller relay1 OFF
Learning Remote Way
1. Press the learning button of the receiver - the light is on, indicating entering the learning state.
2. Press any button of the remote control - the light flashes to extinguishes, indicating that the
learning has been successful.
Clear Remote Way
Press the button for about 8 seconds as the receiver module learns to turn off the indicator light,
indicating that the stored information has been successfully cleared.
Packaging & Shipping
Standard packing : Each one in a plastic case,carton size: 40*29*24CM .
Packing can be customized.
We have strong cooperation with DHL,TNT,UPS,FEDEX,EMS,China Air Post and forwarder.
You also can choose your own shipping forwarder.
1). What frequency you need, 315mhz or 433.92mhz or others ?
2). You need is super-regenerative receiver module or Superheterodyne receiver module?
3). How long distance you need ?
4). You need with decode receiver or not with decode receiver ?
5). Do you need transmitter work with it ?
6). Which output way do you want? Output with 12 volts or output with switch signal？
The output with voltage means input with voltage 12V, output also with voltage 12V
The output with switch signal means that input with voltage 12V, output no voltage, is switch signal, just a signal to send an order.
7). Which working way do you want? interlock, self-lock or inching?