The Main Parameters:
working voltage: 12VDC (5VDC, 24VDC can be customized)
Quiescent current: ≤ 7mA
Working temperature: -20 ° C - +70 ° C
Receive sensitivity: ≥-107dBm
Working frequency: 315MHz to 433MHz
Control voltage: AC, DC optional
Output current: ≤ 5A
Circuit board size: 86mmx72mmx19mm
Shell size: 100mmx80mmx28mm
The 8-channel wireless intelligent rf remote control switch designed and manufactured by our company provides 8 relay output switching signals and has working indicators, which can make the equipment to be controlled reach the positive and negative of the motor; or the on/off switching of the switch And the requirements of various special control procedures. Mainly used in electric doors, windows, lifting equipment, gateways, lifts, industrial control and security industries.
The wireless remote control switch has the characteristics of high confidentiality, large storage capacity, stable performance, low power consumption, and is convenient to use, and does not need to adopt traditional jumper or dial switch coding, and only needs to transmit the wireless signal transmitted by the remote controller. The receiving controller receives and stores, and can be used together. If the learned remote control is lost during use, simply clear the information stored in the receiving controller, and the lost remote controller will not be able to remotely control the receiving controller. To regain the right to use, the owner must Re-learn once to use.
1. self-locking: Press the remote control number 1 to learn
Press the remote control No. 1 button, and the relay corresponding to the No. 1 button is sucked and held, and then press the No. 1 button, the No. 1 relay is disconnected; Press the No. 2 button of the remote control, the No. 2 button corresponds to the relay to attract and hold, and then press No. 2 Key, relay No. 2 is disconnected; 3~8 keys work according to this cycle.
2. Inching: Press the remote control 2 button to learn
Press and hold the remote control No. 1 button, and the relay corresponding to the No. 1 button is pulled in. After the hand is released, the relay is disconnected. Press the No. 2 button, and the relay corresponding to the No. 2 button is pulled in, and then disconnected after releasing the hand; 3~8 buttons Work as usual.
3, signal interlock: press the remote control 4 button to learn
Press the remote control No. 1 button, the corresponding No. 1 relay is sucked and held, press the No. 2 button, the No. 1 relay is disconnected, and the relay corresponding to the No. 2 button is sucked and held; the 3~8 button works according to this cycle.
4, signal 1~4 way self-locking and 2~8 way non-locking coexistence: press the remote control 8th key to learn
Among the 8 relays corresponding to the remote control, 1~4 are self-locking functions, and 5~8 are non-locking functions.
Note: If the learned receiver wants to change to other functions, please clear the receiver and select the desired button to re-read the code.
1. When the receiver is powered on, press the learning button on the receiver to light up and let go, enter the learning state; according to the function you need to select a key to learn by the remote control, the receiver blinks after receiving the signal. About 1 time (the buzzer sounds once) means that the study is successful.
When the receiver is powered on, press and hold the learning button on the receiver for about 8 seconds until the indicator light goes out (the buzzer sounds for about 3 seconds), indicating that the code has been successfully cleared. This receiver can store about 30 different remote control codes.
Very easy and convenient used for home/store anit-theft alarm,electric cars,,motorcycles,automobile ,car alarms,all kind of doors/windows controllers and other industrial control.