Wireless industrial control products learning remote control, copy remote control, learning remote control with learning function, can be used directly with the learning controller, directly use, no coding. It saves the trouble of preparing the remote control, and can be used directly after buying the automatic code.
The learning remote control also has a copy function, which can copy any fixed code remote control. The learning remote control is equivalent to the key blank and can engrave the key of any shape. Just clear the learning remote control factory code and copy the original remote control. The new remote control has all the features of the original remote control.
With the advancement of technology, wireless remote controllers have also expanded to many types. In simple terms, there are two types, one is the infrared remote control mode (IR Remote Control) commonly used in home appliances, and the other is anti-theft alarm device, door and window remote control, and automobile. Remote control and other commonly used radio remote control mode (RF Remote Control). Both have different advantages and the fields of application are different.
The first step is to clear the existing address code.
First of all, we must simultaneously press and hold the two BC buttons on the top of the remote control. At this time, the LED flashes and then turns off. After about 2 seconds, the LED flashes quickly. This indicates that the original address code has been cleared. At this time, all the buttons are flashed. Turn it off and then turn it off.
The second step is to copy the address codes of other remote controllers.
Keep the original remote control and the learning remote as close as possible, while holding down the button to be copied and the button of the learning remote control. This latest lightning learning technology usually takes only 1 second to flash quickly, which means that the button is The address code has been learned successfully! The other three buttons on the remote control are also operated in the same way.
We can even combine two remote controllers with the same address code (the same frequency) into a self-learning remote. It should be noted that sometimes the original remote control and the learning remote control are important in the mutual learning position. Some may have better head-to-head effect, and some may have better back-to-back effect. Customers can try to learn more times and see which study. The remote control distance is farthest.
Recovery operation after misoperation:
If you accidentally accidentally clear the address code of the self-learning remote control, you can also press the two DA buttons under the remote control at the same time for about 2 seconds, the LED will flash 3 times and then start flashing quickly. The address code that was accidentally cleared has been successfully restored.